Products

● Accuracy <0.01mm
● Parallel grip
● Short change over time
● Wear-resistant material
● Available in smooth, radial groove or serrated

● Accuracy <0.01mm
● Parallel grip
● Short change over time
● Wear-resistant material
● Available in smooth, radial groove or serrated

· Widely used in the machinesof TSUGAMI, STAR, CITIZEN, JIANKE, SOWIN and other brands                                                                                                                                        
· Accuracy ≤ 0.002mm                                                                                                                                        
· Supply custom products            

The production engineering possibilities of BOD allow us manufacture finest quality products. Our collets & Guide Bushes are easily interchangeable. Our products are used across the globe for High Precision requirements.

Our collets & Guide Bushes are available in variety of standard sizes and shapes. It is manufactured from High quality special grade steel for high hardness , wear resistance and best functioning.

The shell is made of aviation aluminum, through aging treatment, precision machining, with high rigidity, high precision, long life and so on. Allow the minimum pass Phi D136
The main drive shaft is made of special alloy material, processed by strict heat treatment process, and finally finely ground and formed to achieve high transmission stability.
Gear wheel bearings are imported to ensure the transmission of high torque, low noise.
Input and output forms are diverse and flexible, not limited to BT or ER interface, can meet all kinds of precision machining equipment, can be used for milling, drilling, tapping, grinding and other processes of processing.

The shell is made of QT500-7, through aging treatment, precision machining, with high rigidity, high precision, long life and so on. Allow the minimum pass Phi D118
The main drive shaft is made of special alloy material, processed by strict heat treatment process, and finally finely ground and formed to achieve high transmission stability.
Gear wheel bearings are imported to ensure the transmission of high torque, low noise.
Input and output forms are diverse and flexible, not limited to BT or ER interface, can meet all kinds of precision machining equipment, can be used for milling, drilling, tapping, grinding and other processes of processing.

The shell is made of aviation aluminum, through aging treatment, precision machining, with high rigidity, high precision, long life and so on. Allow the minimum pass Phi D155
The main drive shaft is made of special alloy material, processed by strict heat treatment process, and finally finely ground and formed to achieve high transmission stability.
Gear wheel bearings are imported to ensure the transmission of high torque, low noise.
Input and output forms are diverse and flexible, not limited to BT or ER interface, can meet all kinds of precision machining equipment, can be used for milling, drilling, tapping, grinding and other processes of processing.

Features 
1. Optional drive tool holder 
2. Imput tool holder and shaft is in one-piece design
3. Warranty: 1 years

Details: 
1. The housing is made of 40Cr. After precision machining and aging treatment, it has the features of long service life, outstanding rigidity and accuracy. Allows a minimum pass of Φ35mm.
2. The main drive shaft is made of special alloy material. It can achieve high stability during the transmission after processed by strict heat treatment and grinding finish.
3. The imported gears and bearings with good quality ensure the high torque and low noise in transmission.
4. The way of input and output are fexible and diverse.Not limited to connecting with BT shanks and ER collets,our angle heads can meet all kinds of precision machining equipment for milling, drilling,tapping and grinding processes etc.

Features 
1. Optional drive tool holder 
2. Imput tool holder and shaft is in one-piece design
3. Warranty: 1 years

Details: 
1. The housing is made of 40Cr. After precision machining and aging treatment, it has the features of long service life, outstanding rigidity and accuracy. Allows a minimum pass of Φ35mm
2. The main drive shaft is made of special alloy material. It can achieve high stability during the transmission after processed by strict heat treatment and grinding finish.
3. The imported gears and bearings with good quality ensure the high torque and low noise in transmission.
4. The way of input and output are fexible and diverse.Not limited to connecting with BT shanks and ER collets,our angle heads can meet all kinds of precision machining equipment for milling, drilling,tapping and grinding processes etc.

Features 
1. Optional drive tool holder 
2. Imput tool holder and shaft is in one-piece design
3. Warranty: 1 years

Details: 
1. The housing is made of 40Cr. After precision machining and aging treatment, it has the features of long service life, outstanding rigidity and accuracy. Allows a minimum pass of Φ35mm
2. The main drive shaft is made of special alloy material. It can achieve high stability during the transmission after processed by strict heat treatment and grinding finish.
3. The imported gears and bearings with good quality ensure the high torque and low noise in transmission.
4. The way of input and output are fexible and diverse.Not limited to connecting with BT shanks and ER collets,our angle heads can meet all kinds of precision machining equipment for milling, drilling,tapping and grinding processes etc.

1. The housing is made of aircraft-grade aluminum. After precision machining and aging treatment, it has the features of long service life, outstanding rigidity and accuracy. Allows a minimum pass of Φ100mm
2. The main drive shaft is made of special alloy material. It can achieve high stability during the transmission after processed by strict heat treatment and grinding finish.
3. The imported gears and bearings with good quality ensure the high torque and low noise in transmission.
4. The way of input and output are fexible and diverse.Not limited to connecting with BT shanks and ER collets,our angle heads can meet all kinds of precision machining equipment for milling, drilling,tapping and grinding processes etc.

Features
1. Optional drive tool holder 
2. Imput tool holder and shaft is in one-piece design
3. Warranty: 1 years

Our products include: universal angle head,offset angle head, right angle milling head, and heavy-duty milling head for gantry milling machine,etc. According to the different output methods and the requirements of different machine and their spindles, combined with the installation method of fixed brackets,flanges,connecting plate,etc., we can provide BT, NT, DAT, HSK, MT and other output methods in different forms and sizes.